5 Easy way to cut your monthly electric bills this winter that you might not know

5 Easy way to cut your monthly electric bills this winter that you might not know

baby its cold outside

 

 

DSC05566

In the average new home with a forced air heating and cooling system, 30% of the air moving through the ducts leaks out before it reaches the room it is intended to heat or cool. Seal up the ducts for a better distribution of air throughout your home using mastic tape or glue. A properly designed, calibrated, and maintained system will run more efficiently. Remember to change the air filter on a regular basis to keep the air flow as designed. You may also need to have your ducts cleaned to increase efficiency of your system.

DSC05155Windows are often blamed for the uncomfortable conditions of an older home, but there are bigger holes in almost all cases. Remember to look for these places that heated air is escaping from your home including the attic access / pull down stair, recessed lights, electrical outlets, and rim board. Seal these locations and reduce your energy loss.

 

IMG_5434_5_6

When winter comes a warm fire is often not far behind for those fortunate to have a fireplace. However, when the fireplace is not being used, make sure it is sealed tight. At the very least, close the flue when not burning a fire. You might also consider adding air tight doors if you don’t already have them or using a fireplace balloon to make it air tight (just remember to remove the balloon before using the fireplace.

IMG_2319[1]Make sure your outside mechanical equipment is cleared of any debris, snow, or landscaping that might impact the operation. Most units need 24-36″ of air space in order to run efficiently.

 

water sense

Windows are often blamed for the uncomfortable conditions of an older home, but there are bigger holes in almost all Almost always overlooked when talking about electrical usage is water usage. Heating water is taking a toll on your monthly electric bills if you have an older water heater, uninsulated hot water supply pipes, and water inefficient fixtures. Turn the tide on this impact by installing a heat pump hot water heater, insulating pipes, and changing out fixtures to WaterSense labeled options.